Get FREE Spray Paint Booths Price Quotes
from Multiple Suppliers

• Just starting out looking for a base model.

• Also need spray booth with the following size 7 ft (H) x 8 ft (W) x 8 ft (D)

• Basic Spray booth for Water Based paints and some Lacquor.

• Conveyor Booth

• Conveyor openings on each side, 12" in and 12" wide 8'high.

• We are a furniture manufacturing company. We need spray booth for metal and wood furniture’s.

• Does not have to be size I listed .We paint industrial machines and equipment.

• Gas fired batch oven prefered. We manufacture our own display racks. We had a fire in our powder oven and need a replacment ASAP.

• HEPPA Filtration,outside exhaust

• Heated containment inside our facility for curing mulitple racks housing 40" diameter rolls of laminated films

• Hello, Spray booth needs to have filtered supply air, no dust allowed. Otherwise, no issue.

• I am interested in single phase fan motor and I will require two light fixture and ductwork.

• I need a small system complete. We need to be able to powder coat small clamps.

• I am interested in a CF-1000 paint booth.

• I am intrested in powdercoating systems for small to big i dont know much about it

• I am looking for IR electrical heaters

• I am looking for a bench booth

• I am looking for a booth than can also heat between 150 and 200 deg f. I will be painting scale models, cure the paint and also cure fiberglass parts

• I am looking for a complete powder coating system with booth, drying oven, and gun equipment for a high school.

• I am looking for a floor covering for our painting bay. We do industrial fabrication/painting and are looking for some floor protection.

• I need a booth that we can paint in then do a heat cure. I do not need a high temp heat just around 140-200 max. I need one side of the 16ft length to be as open as possible by either a door or curtian.

• I need a small paint booth for my small cabinet shop. I use all waterborne materials. except i flush out my pump with denatured alcohol or lacquer thinner. i have a $1500-2000 budget

• I need an air make-up system. I think an outdoor unit that stands next to the building would be best with the air ducted through the building wall

• I spray wood cabinets but I need the booth to fit a full size truck inside when it is not in use.

• I want the doors to opens 10'wide

• I would also like prices on the exhaust. 9'-12' should be good.

• I would like to be able to control humidity and temperature.

• I'm going to be powder coating motorcycle parts, chassis, and any small to mid size industrial or commercial jobs

• Item Double Filtration Spray Booth Type Bench Inside Working Width 5' Inside Working Height 4 Inside Working Depth 3 Overall Width 5' 4" Overall Height 7' 2" Overall Depth 5' 2" Fixture Type 48" 4 Tube T8 High Efficiency Rapid Start Fluorescent Fixture Light Fixtures Quantity 1 Fan Size (In.) 18 Motor HP 1 Motor Voltage 230/640 Phase 3 SCFM @ 1/4" SP 2500 SCFM @ 3/8" SP 2500 Standards UL Listed Class 2, OSHA, NFPA 33, OSHA, EPA, NEC, BOCA Includes Belt Guard Cover, Clear Tempered Glass Lens, Gasketed Seal, Filter Rack, Grid for Pads, Roll Media Hanger Assembly, Grid Retainers Must include an air back draft.

• Just starting up so I need a booth that I can install myself and get good use out of.I need the duct work to exhaust out of the roof.The shop I am renting was a body shop at one time and has a pit for a down draft that has been filled in,so later I can put in a dowwn draft.

• Looking at down draft with heat. Thinking of switching to water bourn paint if that makes a difference.

• Looking for a used paint booth preferably USI Italia.

• Looking for omega style booth. Do have one?

• Looking for powder coating system for fairly large parts that we mfg for trucks

• Looking in to setting up a small powder coating painting booth and oven for painting a wire grid unit.

• Need Industrial bench booth for parts

• Need to have a prefabricated booth to locate inside of a steel building.

• Needs a light, exhust fan w/filter, and doors

• Our company is moving into a new building located in western Chicago. We need a heated spray booth that will handle a 32" stretched Cadillac and a Suburban. We would also like two 8'(H)x 8'(W)x 6'(D), for sanding and grinding

• Paint Booth for painting Flanges Perferbly with automatic trolly system with hangers to hang flanges to paint while parts rotates in a oval circle and also with dip tank for smaller parts.

• Please quote with and without doors. I want a self cleaning cartridge system. Thanks.

• Spray booth is for fixative application and airbrush painting in a college art studio. We expect to install the exhaust and make up air for the booth. We are looking for the equipment between the 2. Do we need explosion proof room? do you need room layout?

• Spraybooth must be semi-downdraft. Mix room to be 10x10.

• The booth I am looking for is not for Automotive applications, but will be used briefly to paint small metal items.

• The length, width and height are not hard numbers, our largest part needing paint is 40,30,24 feet, so a booth a little bitt larger than that. both painting and drying booth need to be temp and humidity controlled.

• The piece of property that I'm going to be leasing will not allow a vertical stack through the roof of the building. It has to go out the side wall.

• Theater scenery construction application

• This booth will be attached to an existing building. It will be used to spray heavy equipment parts.

• This booth will be used for gel-coat spraying and curing. Possibly grinding of fiberglass parts from molds.

• This is for a visual arts area within a school.

• This will be for a Custom Powder Coating Shop

• To be enclosed on 3 sides and roof. front doorway to be vinyl flaps. We have an existing older booth, possibly a refurb or repair to that one.

• We are a sheetmetal job shop painting in-house for about 4 years with a 1965 Bayco oven. Ken

• We are an automotive parts online retailer and we are looking to paint many car auto parts in our facility to ship directly to our customers. We need a paint booth capable of painting batches of the following (roughly): 10 hoods 40 hood scoops 20 sets of car side skirts 30 spoilers All of these would need to be able to fit inside the paint booth and be painted together. There are about 15 factory colors that we would set up to paint, and we would paint batches of the above in each of 15 colors.

• We are in need of a booth that has a 12' door.

• We are using this for the application of CorroCote polyurethane coating (Mesison System)

• We need a benchtop paint booth in the approximate demintions given above. This booth will need to vented out side and we will need the necessary parts to vent through a cement block wall and rise above roof line. need to know type of filters that are used.

• We paint alloy car rims so we don't need a full size car paint booth

• We would like a booth that we could keep outside until we have an expansion put on our existing building.

air heater

• Also interested in information on piping for fire suppression system and any other additional fees for items needed other than the booth, e.g. duct work and control panel

• Automated as possible with manual spray gun assistence as needed. These are large gearboxes to be painted and dried/cured for fast cycle time and large volumes per day.

• California epa compliant

• Down draft

• Down draft and heat exchange

• Downdraft, fire supresion system and cure system.

• Drive thru/side down draft/single phase

• Exhaust fan

• Heat cure on roof of spray booth insulated walls

• Heated

• I would like a booth with heat

• I'm looking for a cross draft

• Looking for a ultra clean environment for finished coatings to cure

• May need to be fully enclosed with suppression system. dimensions listed are interior.

• Need encloused paint both for auto and motorcycle paint

• Need everything rof powder coating

• Just need an open face system with duct work and fan

• Pverhead crane access is a must

• Paint booth up to code

• Provide venting and elec requirements , My unit would have the right side on an outside wall , with plenty of room in back and on top for venting

• Self contained

• Side-draft

• Small auto boy shop. Partime work. now needs spray booth required by fire dept.

• Small booth complete with gun etc.

• Spot panel painting and parts small shop space

• Spray paint inj. molded parts - with a two part paint system,

• Spray table or wall unit will be in closed room 10x13x 8'high with living space above. low volume use, need to have wall exhaust. presently use room 5x7x8h with kitchen type wall exhaust fan. handles needs ok but room is too small. use some laquer finishes.

• This booth will have a over head conveyor running thru it

• Triple filtration, exhaust fan.

• Vacume gage indicates, filters are full or air movement problems in the booth

• Water wash spray booth, please

• We need a UL approved downdraft spray booth for a new building that we are erecting.

• We need a booth to paint cars & minivans trucks

• We need fiberglass gel coat layup room

• We would use it for painting stove pipe we sell wood,gas pellet,stoves and paint the pipe to match the stove,must be down draft

• Would like 24" fan & 1.5hp motor open face paint booth rear exhaust.