Estimating steel building prices can be complicated, because there are a large amount of variables that go into each project. Local building codes have a big impact on steel building prices: a building in Denver has to be capable of a handling a huge snow load, so it requires significantly stronger components than a building in New Mexico. And extras like insulation and interior panels can make a big difference. See what other BuyerZone users have paid for steel buildings.
That said, a typical price for basic rigid-frame steel buildings is between $16 and $20 per square foot. This includes materials, delivery, the foundation, and construction. A more finished building may be closer to $20 to $30 per square foot, and extensively customized buildings with brick facades, unusual shapes, or complicated construction can reach $40 per square foot or more.
Materials alone can cost $5 to $15 per square foot. This varies according to size: small buildings cost more per square foot. Materials for a 250' x 120' church building might cost $240,000, or $8/sq ft, while a 20' x 20' garage might cost $6,000, or $15/sq ft.
Foundation costs are fairly standard, usually $4 to $8 per square foot for poured concrete. Remember that GCs may include this cost in their proposals, but brokers and manufacturers of metal buildings definitely will not.
Instant Vendor Comparison
Select the vendors that you would like to compare
Labor costs will vary widely depending on the size of the project but can range from $3 to $10/sq ft. These costs will be charged by the hour, so increased complexity will drive them up considerably.
Insulation will add thousands of dollars to larger steel building prices - but as mentioned previously, is a very good investment. It will improve the resale value and soundproofing of your building, in addition to saving energy costs - so it isn't an area to skimp on.
Contract tips
You'll be asked to sign a contract that details the design loads and specifications for the building. As with any major business purchase, you should inspect the contract very carefully before signing it. Here are a few things to look for:
Substitution clauses. Manufacturers may try to give themselves the right to use different materials if those specified are not available. The idea is sound, but is often used to substitute cheaper materials for those you wanted. Make sure any changes are "equal or greater value" or have to be approved by you.
Specifics. The more specifics in the contract, the better. The contract should not just list a "10 x 10 overhead door" - prices range from $250 to $1200 on such doors. The contract should list brand names and model numbers, insulation values, locks, coatings or paints, and more. This is another way unscrupulous dealers may try to stick you with lower-quality materials, so make sure every component is detailed in the contract.
Responsibilities. Since brokers, GCs, and manufacturers play different roles in the process, make the contract details exactly who is responsible for each phase of the project: design, engineer's specification, fabrication, delivery, construction, and inspection. Learn more about the various service levels that steel building providers can offer.